How to Fix Solar Lights with Nail Polish: The Easy Way
Nail polish can be used to fix solar lights because it acts as a conductor and helps the light turn on. It also helps to protect the solar panel from damage. It also allows light to pass through the solar panel more easily, which means that the light will be brighter.
If you have ever had a problem with your solar lights, you know that it can be really frustrating. Those little lights are so darn cute, and it’s so annoying when they don’t work!
Are you wondering how to fix outdoor solar lights that stop working? Don’t worry, we are here to show you how easy it is.
We will teach you how to fix solar lights with nail polish. Yes, that’s right – nail polish! Keep reading for instructions on how to do it yourself.
The Reason Nail Polish Works on Solar Lights
Nail polish is made up of a substance called resin. Resin is a hard, glossy material that is used in many different things – including solar lights! When you apply it to the surface of solar light, it creates a barrier.
This barrier helps to reflect light better, which makes the solar cells generate more power from direct sunlight. In addition, nail polish can also help to protect the surface of the solar light from scratches and other damage.
Take a close look at your solar lights. If the problem is that the light isn’t turning on, the fix is very simple. Just apply a coat of nail polish to the solar panel. The nail polish will act as a conductor and help the light turn on.
If the lights are turning on but not shining as brightly as they used to, you can also use nail polish to fix this problem. All you need to do is apply a thin layer of nail polish to the solar cells. This will help reflect more light and make the lights shine brighter.
It is important to note that you should only use clear nail polish for this task. Do not use any type of colored nail polish, as it will interfere with the light shining through.
The Benefits of Using Nail Polish to Fix Solar Lights
The reason why clear polish is a great idea to fix solar lights is that it is reflective. When the light hits the solar panel, it reflects off of the nail polish and into the solar cell. This makes the solar cell work better, and as a result, your lights will work better too!
Not only is this method easy, but it is also very cheap. You probably already have all of the supplies you need at home, and if you don’t, they are very affordable.
The best part is that this method works for both solar lights that are plugged into an outlet and solar lights that run on batteries. So whether your light is having trouble turning on or it just isn’t shining as brightly as it used to, give this method a try!
There are a number of benefits to using nail polish to fix solar lights. Here are just a few:
- Nail polish is easy to find and usually inexpensive
- It can be used to repair a wide variety of solar lights
- Nail polish dries quickly, so you won’t have to wait long for your repairs to take effect
- It is a non-toxic substance, so it is safe to use around children and pets
Now that you know about the benefits, let’s get into the instructions on how to fix solar path lights with nail polish. Follow the steps below, and your solar lights will be as good as new in no time!
How to Fix a Solar Light with Nail Polish
If your solar lights have stopped working, don’t despair! You can easily fix them with some clear nail polish. You just need a couple of things and about five minutes of your time. This DIY process is a fairly easy project to bring your solar lights back to life.
What you need:
- One or more solar lights that are not working
- Clear nail polish (Click to check at Amazon)
- A soft brush or a small paintbrush (Click to check at Amazon)
Our simple Step by step guide on how to revive solar lights with nail polish:
Step One: Disconnect the Light
Unplug your solar light or remove the batteries, if it is a battery-powered light. You don’t want to be working with live electrical wires! Disconnecting it also allows you to move the light to a work surface and have better access.
Step Two: Clean the Surface of The Light
Make sure that the solar cells part of the solar light is free of any dirt, dust, or debris. We need a clean surface to work with so that the nail polish will adhere properly. Wipe the solar cell area clean with a dry cloth.
This may look frosted over white at the moment and this is why no light is being absorbed by the cells.
Step Three: Apply a Thin Layer of Nail Polish
You can use a small brush or a small paintbrush for this step. Be sure to paint the clear polish evenly and smoothly over the solar cells. You don’t want any clumps! Be sure to cover the entire solar cell area. Use a q tip for hard to reach areas.
Step Four: Allow the Nail Polish to Dry
This should only take a few minutes but this may take longer if you applied a thick coating of polish. Don’t try to use the light until the nail polish is completely dry.
Step Five: Test the Light
Once the nail polish has dried, plug in your solar light and test it out at night time! If it doesn’t work at first, don’t worry – give it a few extra hours to fully dry. Sometimes it takes a little longer for the nail polish to cure properly.
If you followed these simple steps, your dim lights should now be bright. This is a quick and easy method that anyone can do! The best thing is the cost is so low in comparison to replacing the whole thing.
Tips for Fixing Solar Lights with Nail Polish
Even though nail polish is a really quick and handy way to fix solar lights, there are a few things to keep in mind.
- If your solar light has a plastic light cover, remove it before you start working. This will give you better access to solar cells.
- Apply a thin layer of nail polish for best results. A thick coat may not dry properly and could end up looking smudged.
- Make sure that you allow the nail polish to dry completely before trying to use the light. Nail polish can take a while to cure properly, so be patient!
- If your solar light still isn’t working after using this method, it may be time to replace it. Solar lights usually only last for a few years, so it may be time to invest in a new light.
- If you want to prevent this problem from happening again, try using a UV protection spray on your solar lights. This will help protect the solar cells from damage and keep them working longer.
Rejuvenating solar lights couldn’t be easier! If you follow these steps, you should have no problem fixing your solar lights with We hope these tips have helped you fix your solar lights with nail polish!
FAQ
Final Thoughts
Solar landscape lights not working is a common issue for solar lights but it is amazing what a little bit of nail polish can do to go from a dim and dull solar garden light to one that shines bright!
Not only does this DIY fix work well, but it’s also an easy and cheap solution that takes very little time to complete.
Did you just buy a set of solar lights and you can’t wait to get them up and running, but you’re not sure how to charge solar lights for the first time? Follow our simple guide on how to charge solar lights for the first time and you’ll be good to go!